Measurement-specialties PCI-DIO24 Bedienungsanleitung PDF herunterladen (Seite 11)

PCI-DIO24 User's Guide Installing the PCI-DIO24

Information on signal connections

General information regarding signal connection and configuration is available in the Guide to Signal

Connections. This document is available on our web site at www.mccdaq.com/signals/signals.pdf.

Cabling

The red stripe

identifies pin # 1

Figure 2. C37FF-x cable

Figure 3. C37FFS-x cable

Field wiring and signal termination

You can connect the PCI-DIO24 to the following termination boards using the C37FF-x or C37FFS-x cable:

 SCB-37 — 37-conductor, shielded signal connection/screw terminal box that provides two independent 37-

pin connections.

 CIO-MINI37 — 4 x 4, 37-pin screw terminal board.

 CIO-MINI37-VERT — 37-pin screw terminal accessory with vertical 37-pin male D connector.

 CIO-SPADE50 — 16" X 4" termination panel which mates with both 37-pin and 50-pin connectors.

Details on these products are available on our web site at

www.mccdaq.com/products/screw_terminal_bnc.aspx.

The following relay racks and accessory boards can be used with the PCI-DIO24:

 SSR-RACK24 — 24-position solid state relay rack..

 SSR-RACK08 — Eight-channel solid state relay rack.

 CIO-ERB08 — Eight-channel electromechanical relay accessory for digital I/O boards.

 CIO-SERB08 — Eight Form C and ten socketed relay accessory for digital I/O boards.

 CIO-ERB24 — 24-channel electromechanical relay accessory for digital I/O boards.

Details on these products are available on our web site at www.mccdaq.com/products/signal_conditioning.aspx.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 17 18

Keine Kommentare

Measurement-specialties PCI-DIO24 Bedienungsanleitung Seite 11