Measurement-specialties PMD-1024HLS Bedienungsanleitung PDF herunterladen (Seite 12)

PMD-1024HLS User's Guide Installing the PMD-1024HLS

When you connect the PMD-1024HLS for the first time, a Found New Hardware popup balloon

(Windows XP) or dialog (other Windows versions) appear as the PMD-1024HLS is detected.

Another Found New Hardware balloon or dialog opens that identifies the PMD-1024HLS as a USB

Human Interface Device.

When the balloon or dialog closes, the LED on the PMD-1024HLS should flash and then remain lit. This

indicates that communication is established between the PMD-1024HLS and your computer

Caution! Do not disconnect any device from the USB bus while the computer is communicating with

the PMD-1024HLS, or you may lose data and/or your ability to communicate with the

PMD-1024HLS.

If the LED turns off

If the LED is lit but then turns off, the computer has lost communication with the PMD-1024HLS. To

restore communication, disconnect the USB cable from the computer, and then reconnect it. This should

restore communication, and the LED should turn back on.

2-3

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 22 23

Keine Kommentare

Measurement-specialties PMD-1024HLS Bedienungsanleitung Seite 12